Код: Выделить всё
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.09.15 11:02:33 =~=~=~=~=~=~=~=~=~=~=~=
NAND: 0 MiB
U-Boot 2008.10 (Jul 26 2011 - 21:22:58)
DRAM: 256 MB
## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB
Flash: 16 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Press CTRL-C to abort autoboot in 1 secondsalpum_set!!
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
## Booting kernel from Legacy Image at 80080000 ...
Image Name:
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1448408 Bytes = 1.4 MB
Load Address: e2800000
Entry Point: e2800000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux............................................................................................ done, booting the kernel.
Linux version 2.6.24-rt1-hi3520v100 (root@ubuntu) (gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #17 Wed May 16 05:20:33 PDT 2012
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f
Machine: hi3520v100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
Kernel command line: mem=192M console=ttyAMA0,115200 root=1f01 rootfstype=cramfs mtdparts=physmap-flash.0:5M(boot),6M(rootfs),3584k(oem),1536k(config) pcimod=host pciclksel=1 mac=00:17:4f:01:31:99 VDOSYS=PAL DDR=2G NET=RGMII
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 192MB = 192MB total
Memory: 191744KB available (2636K code, 242K data, 100K init)
Mount-cache hash table entries: 512
HI_VERSION=LINUX_2_6_24-M01C04FB01F @Hi3520v100R001_C_0_2_0 2010-03-12 13:45:01
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
Hisilicon clock system V0.01
PCI: device 0000:00:00.0 has unknown header type 25, ignoring.
PCI: device 0000:00:01.0 has unknown header type 25, ignoring.
PCI: device 0000:00:03.0 has unknown header type 14, ignoring.
PCI: device 0000:00:04.0 has unknown header type 14, ignoring.
PCI: device 0000:00:05.0 has unknown header type 14, ignoring.
PCI: device 0000:00:06.0 has unknown header type 14, ignoring.
PCI: device 0000:00:07.0 has unknown header type 14, ignoring.
PCI: device 0000:00:08.0 has unknown header type 14, ignoring.
PCI: device 0000:00:09.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0a.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0b.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0c.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0d.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0e.0 has unknown header type 14, ignoring.
PCI: device 0000:00:0f.0 has unknown header type 14, ignoring.
PCI: device 0000:00:10.0 has unknown header type 14, ignoring.
PCI: device 0000:00:11.0 has unknown header type 14, ignoring.
PCI: device 0000:00:12.0 has unknown header type 14, ignoring.
PCI: device 0000:00:13.0 has unknown header type 14, ignoring.
PCI: device 0000:00:14.0 has unknown header type 14, ignoring.
PCI: device 0000:00:15.0 has unknown header type 14, ignoring.
PCI: device 0000:00:16.0 has unknown header type 14, ignoring.
PCI: device 0000:00:17.0 has unknown header type 14, ignoring.
PCI: device 0000:00:18.0 has unknown header type 14, ignoring.
PCI: device 0000:00:19.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1a.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1b.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1c.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1d.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1e.0 has unknown header type 14, ignoring.
PCI: device 0000:00:1f.0 has unknown header type 14, ignoring.
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: hisi_timer1 clocksource has been installed.
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
yaffs Mar 25 2010 07:44:11 Installing.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0x20090000 (irq = 12) is a AMBA/PL011
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0x200a0000 (irq = 12) is a AMBA/PL011
uart:2: ttyAMA2 at MMIO 0x200b0000 (irq = 13) is a AMBA/PL011
RAMDISK driver initialized: 4 RAM disks of 16384K size 4096 blocksize
loop: module loaded
physmap platform flash device: 04000000 at 80000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
4 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x00500000 : "boot"
0x00500000-0x00b00000 : "rootfs"
0x00b00000-0x00e80000 : "oem"
0x00e80000-0x01000000 : "config"
No NAND device found!!!
h2v100-ehci h2v100-ehci.0: h2v100-ehci
h2v100-ehci h2v100-ehci.0: new USB bus registered, assigned bus number 1
h2v100-ehci h2v100-ehci.0: irq 23, io mem 0x100b0000
h2v100-ehci h2v100-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
h2v100-ohci h2v100-ohci.0: h2v100-ohci
h2v100-ohci h2v100-ohci.0: new USB bus registered, assigned bus number 2
h2v100-ohci h2v100-ohci.0: irq 22, io mem 0x100a0000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
u32 classifier
Performance counters on
Netfilter messages via NETLINK v0.30.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 100K
init started: BusyBox v1.1.2 (2010.10.12-04:51+0000) multi-call binary
_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ _/ / / \_/ \_ ______
___________\___\__________________
[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S20Cfg
RESO=1024x768
RESO_W=1024
RESO_H=768
NTSC_PAL_SW=1
AUTO=0
VDOSYS=PAL
NORM=2
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110104: 0x00009876 --> 0x00009654
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110100: 0x00000888 --> 0x00000886
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011010c: 0x00000001 --> 0x00000002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110110: 0x00000002 --> 0x00000006
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110114: 0x00000003 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110118: 0x00000005 --> 0x00000006
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011011c: 0x00000006 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110128: 0x00000007 --> 0x00010020
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011012c: 0x00000007 --> 0x000103A1
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110130: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110134: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110138: 0x00000007 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011013c: 0x00000007 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20050078: 0x00000000 --> 0x00008002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120100: 0x00000444 --> 0x00000444
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120104: 0x00009876 --> 0x00009654
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012010c: 0x00000001 --> 0x00010640
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120110: 0x00000002 --> 0x00000003
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120114: 0x00000003 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x201201Hisilicon Media Memory Zone Manager
18: 0x00000005 --> 0x00000001
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012011c: 0x00000006 --> 0x00000002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120128: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012012c: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120130: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120134: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120138: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012013c: 0x00000007 --> 0x00000005
[ipcm_vdd_init, 422]: local_cpu_id = 36
[ipcm_vdd_close, 268]: handle 0xcbfe7540
[ipcm_vdd_init, 455]: IPCM hardware initialized successfully 0
hifb: module license 'Proprietary' taints kernel.
hifb info: HIFB_MAIN_VERSION[v1.0.0.2] Build Time[Sep 29 2010, 16:15:34]
hifb info: video:vram0_size=5242880,vram1_size=11538432,vram2_size=1658880,vram4_size=4096
hifb info: succeed in registering the fb0: ovl0 frame buffer device
hifb info: succeed in registering the fb1: ovl1 frame buffer device
hifb info: succeed in registering the fb2: ovl2 frame buffer device
hifb info: succeed in registering the fb3: ovl4 frame buffer device
TDE_MAIN_VERSION[v2.0.0.0] Build Time[Sep 29 2010, 16:15:28]
TDE_ADP_VERSION[hi3520adp v2.0.0.0] Build Time[Sep 29 2010, 16:15:28]
tde run on master arm
tde run for graphic service
tde map reg:basePhyAddr:20140000 baseVirAddr:cc874000 size:3000
Hisilicon UMAP device driver interface: v3.00
Chip Version: Hi35200100
load vd.ko ....OK!
load simd.ko OK
load vdec.ko ....OK
load vpp.ko ....OK!
load md.ko....OK!
insmod: cannot open module `hi3520_pciv_fmwm.ko': No such file or directory
nvp1104a driver init successful! chips = 0, norm = 2,audio stage=0
chips:1, norm:2
chips=1
chips:1, norm:2
chips=1
chips:1, norm:2
chips=1
rn6264: version magic '2.6.24-rt1-hi3515v100 mod_unload ARMv5 ' should be '2.6.24-rt1-hi3520v100 mod_unload ARMv6 '
insmod: cannot insert `/dvr/extdrv/rn6264.ko': Invalid module format (-1): Exec format error
cat: /sys/module/rn6264/parameters/chips: No such file or directory
[: 0: unknown operand
VD=TW2862
VD_NORM=2
dvr_vd_tw2862[13]: ##[ IPCM_Check, 222]: remote not ready, now connect and wait ...
########### m_chips=1
[ IPCM_Check, 252]: remote connected
box_init[67]: pch=1024x768
box_init[90]: VO0: Type = 2, Sync = 8
box_init[67]: pch=AUTO
box_init[90]: VO1: Type = 0, Sync = 0
hifb info: vo max resolution w:1024 h:768
cat9883c_device_init[163]: mode=1, 0x34
Thu Jan 1 00:00:05 UTC 1970
PCI: enabling device 0000:00:02.0 (0040 -> 0043)
0x403f: latency timer and cache line value !
*************** bar5: b0020000
atp862x_His 0000:00:02.0: atp862x 0001.0000 32 slots 4 ports 3 Gbps 0xf impl unknown mode
atp862x_His 0000:00:02.0: flags: 64bit ncq led clo only pmp slum part
pdev->irq is 1d
hifb info: vo max resolution w:1024 h:768
hifb info: The layer is show(1) now!
scsi0 : atp862x_His
hifb info: vo max resolution w:720 h:576
hifb info: The layer is show(1) now!
scsi1 : atp862x_His
scsi2 : atp862x_His
scsi3 : atp862x_His
ata1: SATA max UDMA/133 abar m4096@0xb0020000 port 0x0 irq 29
ata2: SATA max UDMA/133 abar m4096@0xb0020000 port 0x80 irq 29
ata3: SATA max UDMA/133 abar m4096@0xb0020000 port 0x100 irq 29
ata4: SATA max UDMA/133 abar m4096@0xb0020000 port 0x180 irq 29
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
gv7601: CS0(0x006) = FFFF
gv7601: CS1(0x006) = FFFF
gv7601: CS2(0x006) = FFFF
gv7601: CS3(0x006) = FFFF
gv7601: chips = 4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
Driver 'sd' needs updating - please use bus_type methods
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
Driver 'sr' needs updating - please use bus_type methods
modprobe: module ahci not found.
modprobe: failed to load module ahci
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
usbcore: registered new interface driver TouchKit
acer_init
usbcore: registered new interface driver acer_t230h
insmod: cannot open module `/dvr/extdrv/pl230': No such file or directory
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nowayout= 0, nodeamon= 0)
HISI_WDT-MDC030001 @Hi3511v110_OSDrv_1_0_0_8 2009-03-30 10:45:48<6>HISI_WDT-MDC030001 @Hi3511v110_OSDrv_1_0_0_8 2009-03-30 10:45:48
HISI_IRDA-MF @Hi3520v100R001_C_0_2_0 2010-06-29 22:34:49
hiir: init ok. ver=Jun 29 2010, 22:34:49.
RGMII=mem=192M console=ttyAMA0,115200 root=1f01 rootfstype=cramfs mtdparts=physmap-flash.0:5M(boot),6M(rootfs),3584k(oem),1536k(config) pcimod=host pciclksel=1 mac=00:17:4f:01:31:99 VDOSYS=PAL DDR=2G NET=RGMII
H2GMAC module init start!
H2GMAC MDIO Bus: probed
H2GMAC module init done!
NET: Registered protocol family 17
/etc/init.d/S20Cfg: /etc/init.d/S20Cfg: 233: /dvr/config/run: not found
ln: /dvr/oem/html/cgi-bin/net_html.cgi: File exists
ln: /dvr/oem/html/cgi-bin/net_jpeg.cgi: File exists
ln: /dvr/oem/html/cgi-bin/net_video.cgi: File exists
ln: /dvr/oem/html/cgi-bin/info.cgi: File exists
mount: Mounting /dev/mtdblock3 on /dvr/config failed: Device or resource busy
/dev/ttyS002 4
get 8051 version = 10
get 8051 Firmware version = 10
data1=0xe2715dac,data2=0xe04be6f2,data3=0xdcda8b9d,data4=0x1316acc
index= 7,type=16CH-480A
box_profile[115]: TW2862
dvr_vd_tw2862[13]: ############# m_chips=1
get_ch_num[54]: ##########m_chips=1
box_profile[157]: z_chnum = 4, z_ntsc = 0, z_mdin = 0
box_profile[284]: z_mcu = 16CH-480A, mcu_idx = 16
box_profile[294]: a = 1, b = 0, c = 0
box_profile[311]: oem_id=ddfa0432
box_ftp[6]: enter!!
set_timeout[44]: WDIOC_SETTIMEOUT = 60s
dvr_vd_tw2862[13]: ############# m_chips=1
dvr_ap[185]: ALPU CHECK
PHY: 0:01 - Link is Down
set_adec_mode[358]: mode=0,m_adec.mode=0
init_aio[521]: reset_ao finish!!
On Accept
open[200]: m_data.num_dev = 0
load[1089]: fd=78,file=/tmp/config/sys.conf
set_tz_param[2329]: TZ=STD-3:00, timezone=-10800, daylight = 0
set_ao_param[2315]: gain=12
socket: Bad file descriptor
/dvr/bin/mini_httpd: started as root without requesting chroot(), warning only
set_mailsend_param_protocol[1896]: protocol = 0
set_mailsend_param_to[1889]: trigger = 0xFFFFFFFF, p_to =
set_param[33]: p_serv=, port=3100, p_id=, type=0x0
set_param[1966]: CONFIG_PARAM_FTP
RTNETLINK answers: No such file or directory
set_schedule_sendmail[150]: weekday[0]=00
set_schedule_sendmail[150]: weekday[1]=00
set_schedule_sendmail[150]: weekday[2]=00
set_schedule_sendmail[150]: weekday[3]=00
set_schedule_sendmail[150]: weekday[4]=00
set_schedule_sendmail[150]: weekday[5]=00
set_schedule_sendmail[150]: weekday[6]=00
set_record_param[2031]: manual = 0, schedule = 1
set_reboot_param[2133]: weekly=0, time=3
set_lan_param[1980]: enable=1, ip=192.168.0.16, dns=168.95.0.18
save_config[2201]: m_config->save(/tmp/config/sys.conf)
power_on[38]: EVENT_TYPE_POWER_ON
thread_proc[305]: dvr_proc_rec: m_pid = 787
thread_proc[315]: dvr_proc_play: m_pid = 788
thread_proc[58]: dvr_proc_write: m_pid = 789
On Accept
run[425]: count=1
run[668]: nrec = 0xF, erec = 0x0
run[675]: m_sys_status.vloss = 0xF
broadcast[31]: RADIO_STATUS_ALL: 194
/dev/ttyS001 4
thread_proc[168]: dvr_serv(65002): connect from host 127.0.0.1, port -23971.
connect success to server ap
thread_proc[168]: dvr_serv(65001): connect from host 127.0.0.1, port -6812.
login[29]: ip = 0.0.0.0
login[39]: Alice: g = 41, p = 31, g^x % p = 20
login[45]: Bob: g^y % p = 2
login[58]: auth success
ctrl_exec[394]: CMD_SYSTEM_SPEC
killall: WSD_daemon: no process killed
ctrl_exec[208]: CMD_CONFIG_GET: 201
ctrl_exec[218]: CMD_CONFIG_UI_READ: 0, 128
Failed to bind udp socket
WSDiscoveryService.cpp, line 61, Start
App.cpp, line 148, Start
App.cpp, line 83, Run
ctrl_exec[218]: CMD_CONFIG_UI_READ: 128, 1040
hifb info: vo max resolution w:720 h:576
hifb info: vo max resolution w:1024 h:768
(none) login: broadcast[31]: RADIO_STATUS_ALL: 195
ctrl_exec[251]: CMD_CONFIG_PRIV_READ: 0, 256
ctrl_exec[251]: CMD_CONFIG_PRIV_READ: 256, 256
ctrl_exec[218]: CMD_CONFIG_UI_READ: 101168, 40964
ctrl_exec[460]: CMD_SYSTEM_SET_EVENT_REC_SINGLE_CH
ctrl_exec[399]: CMD_SYSTEM_STATUS
ctrl_exec[208]: CMD_CONFIG_GET: 1301
### xml = 0x40342640
ctrl_exec[139]: CMD_VAC_SET_AO: CH-1
ctrl_exec[238]: CMD_CONFIG_UI_WRITE: 128, 1040
ctrl_exec[242]: CMD_CONFIG_UI_SYNC
ctrl_exec[268]: CMD_CONFIG_ENCOSD_READ
ctrl_exec[464]: CMD_SYSTEM_SET_SPOT_ENABLE
system_set_spot_enable[1297]: enable=0
ctrl_exec[251]: CMD_CONFIG_PRIV_READ: 512, 65536
hifb info: vo max resolution w:1024 h:768
hifb info: vo max resolution w:720 h:576
hifb info: The layer is show(1) now!
fd_ReadFromServ = 12
fd_WritetoServ = 13
set baudrate = 9600
On Accept
thread_proc[168]: dvr_serv(65002): connect from host 127.0.0.1, port -23969.
TDE failed: QuickCopy
ctrl_exec[444]: CMD_SYSTEM_AUTORUN
client_recv[117]: fd = 103, res: type = -1, size = 0
PHY: 0:01 - Link is Up - 100/Full
broadcast[31]: RADIO_STATUS_ALL: 206
ctrl_exec[208]: CMD_CONFIG_GET: 701
ctrl_exec[612]: CMD_NET_SET_SPEED
wget: checkip.dyndns.com: Unknown host
route: SIOC[ADD|DEL]RT: No such process
recv_res[41]: res = 256
net_set_speed[3113]: speedidx=0
RTNETLINK answers: No such file or directory
